Dewalt DCK264NT 18V XR Framing & Finishing Nailer (Body Only) in TSTAK Rolling Case

This ultimate Dewalt Nailer Twin Pack contains both DCN692 Framing (1st Fix) Nailer and DCN660 Finishing (2nd Fix) Nailer so you can complete any nailing task

This is a terrific bundle of 2 Cordless Body Only Nailers from Dewalt. Featuring brushless motors and coming with a Case. Suitable for 1st and 2nd fix jobs, everything is covered with these 2 sterling performers. Contains the DCN692 Framing (1st Fix) Nailer and DCN660 Finishing (2nd Fix) Nailer and a TSTAK Rolling Tool Case. Sold without batteries or charger.

DCN692 Framing (1st Fix) Nailer Features:

• The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
• Mechanical rather than gas operation offers consistent performance at a temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements
• Class-leading vibration and sound figures offer fantastic user protection
• Versatile 30 - 34 degree magazine angle will accept most clipped heads, and off-centre round head paper tape or wire weld collated framing nails
• The reversible belt/rafter hook provides increased portability and versatility on the job-site
• Depths can be easily adjusted using the thumb wheel depth adjuster
• Increased visibility and durability along with protection for work surface from the non-mar contact-trip
• Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
• Gas-free operation offers a significant saving in running costs
• Tool-free stall/jam clearance minimises user downtime
• Cordless design so no hanging leads to deal with
• Users can engage contact trip lock-off and prevent accidental dis-charge of fastener
• Dry fire lockout ensures that the tool is protected from firing without nails in the magazine

DCN660 Finishing (2nd Fix) Nailer Features:

• Benefit from longer runtime, quicker readiness to fire and less recoil
• Brushless motor technology offers the power to fire a 63mm nail into softwood and a 50mm nail into hardwood
• Tool-free stall/jam clearance minimises user downtime
• Mechanical rather than gas operation offers significant cost savings as well as a consistent performance at temperatures between -20 and 50 degrees celcius and minimal cleaning /service requirements
• Protective pads to lay the tool down on its head
• The durable magazine accepts 32 to 63mm 16Ga nails
• Mode selector allows for bump or sequential nailing
• LED lights with an error notification
• Easy tool-free clearing of jams and stall release
• Easy depth adjustment with easy-to-read gauge

Comes with:​

• 1 x Belt hook (reversible)
• 2 x No mark tips
• TSTAK Rolling Tool Case

Specification:

DCN692 Framing Nailer:

• Nail Diameter: 2.8 - 3.3 mm
• Magazine angle: 30 - 34°
• Magazine loading: Rear-load
• Nail Length: 50 - 90 mm
• Magazine capacity: Up to 55 Nails
• Firing mode: Bump & Sequential
• Length: 345 mm
• Width: 125 mm
• Height: 338 mm
• Nailer Operating Mode: Selective
• Integrated Belt Hook: Yes
• Jam Clearing: Yes
• Impact energy: 105 J
• Temperature Range: -20 to 50°C
• Fault indicator: Yes
• Weight: 4.1 kg

DCN660 Finishing Nailer:

• Nail Diameter: 1.6 (16Ga) mm
• Magazine angle: 20°
• Magazine loading: Rear
• Nail Length: 32 - 63 mm
• Magazine capacity: 110 Nails
• Trigger Type: Bump & Sequential
• Length: 310 mm
• Width: 95 mm
• Height: 305 mm
• Weight: 2.7 kg
• Nailer Operating Mode: Bump and Sequential
• Jam Clearing: Tool-free
• Temperature Range: -20 to 50°C