We are the sole UK distributor of the New Rhinoboots
These boots are ideal for agricultural and equestrain use, they are not suitable for site or construction use.
Available in UK sizes 7-12
Rhinoboots conform to EN ISO 20345:2011 S5 SRC HRO
Compression protection provided is 15,000 Newton’s
CE Certified
Steel Toecap
Steel Midsole
Anti Slip
Insulated for cold & heat
Cushioned insole
Rhinoboots conform to the highest safety standards
SLIP RESISTANCE
SRA – Tested on ceramic tile wetted with dilute soap solution.
SRB – Tested on smooth steel with glycerol.
SRC – Tested on both the above conditions.
SAFETY RATING CE EN345 or ISO 20345
SB – Basic safety protection. 200 joule toe cap.
SBP – Basic safety protection. 200 joule toe cap. Penetration resistant midsole.
S1 – 200 joule toe cap. Closed seat region. Anti-static Energy absorption.
S1P – 200 joule toe cap. Closed seat region. Anti-static. Energy absorption. Penetration resistant midsole.
S2 – 200 joule toe cap. Closed seat region. Anti-static. Energy absorption. Water absorption.
S3 – 200 joule toe cap. Closed seat region. Anti-static. Energy absorption. Penetration resistant midsole. Water absorption and penetration resistant. Cleated outsole.
S4 – 200 joule toe cap. All rubber or all polymeric anti-static footwear. Energy absorption.
S5 – 200 joule toe cap. All rubber or all polymeric anti-static footwear. Energy absorption. Penetration resistant midsole. Cleated outsole.
HRO – Heat Resistant Outsole 300ºC.
|
Marking Code
|
|
Penetration resistance (1100 Newton’s)
|
P
|
|
Electrical properties:
|
|
|
Conductive (Max 100 kΩ )
|
C
|
|
Antistatic (Range of 100 kΩ to 1000 MΩ )
|
A
|
|
Electrically insulating footwear
|
I
|
|
Resistance to inimical environments:
|
|
|
Insulation against heat
|
HI
|
|
Insulation against cold
|
CI
|
|
Energy absorption of seat region (20 Joules)
|
E
|
|
Water resistance
|
WR
|
|
Metatarsal protection
|
M
|
|
Ankle protection
|
AN
|
|
Cut resistant upper
|
CR
|
|
Upper
|
|
|
Water penetration and water absorption
|
WRU
|
|
Outsole
|
|
|
Resistance to hot contact
|
HRO
|
|
Resistance to fuel oil
|
FO
|
|
|
|
Warranty: All Rhinoboots have a 6 months, limited warranty in normal use against any manufacturing flaw(s), defective materials and workmanship. Must have proof of purchase such as original receipt and submit claim within 6 months of purchase.
The Rhinoboots warranty does not cover damage due to holes worn in toes, burn marks, punctures, cuts, and abrasions from outside causes or misuse and/or abuse by the wearer.
The warranty may be void if the user applies any materials not recommended, such as polishes, oils, or other chemicals that result in damage to the materials of the footwear.
