Trend KWJ900 Kitchen Worktop Jig (900mm)

Use The Trend KWJ900 Kitchen Worktop Jig for precise and accurate joints

The Trend KWJ900 Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Trade all-in-one jig for joining worktops up to 900mm wide with a router. 

Features:   

• Engraved markings for identification of pinholes 
• Comes with pins made from ABS plastic for strength
• Engraved lines for short 65mm bolts and worktop cross-cut 
• Three open-ended bolt recesses (dog bone style) for 150mm bolts
• Cuts up to 40mm thick worktops with or without anti-drip post formed edge 
• Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops 
• 10mm diameter plastic pins with tapered shoulder for tight fit provides three-point pin contact to ensure ease of setting up 
• Left hand and right-hand corners, 400mm radius peninsular joint, 45-degree end cut with slight radius, 45-degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps 

9 Functions:  

• Male cut
• Female cut
• 45° end cut
• Curved peninsular 
• 45° mitre corner joint 
• R40mm corner radius 
• Connector bolt recess 
• R100mm corner radius 
• 35mm circular hinge and 3/4" BSP hole  

Specification: 

• Weight: 8.2kg
• Width: 390mm 
• Length: 1185mm
• Thickness: 12mm
• End Cut 45 degrees 
• Corner Radius: 40mm 
• Corner Radius: 100mm 
• Corner Radius: 400mm
• Corner Mitre Joint: 45 degrees